BRIGHT AND SHINY DECORATIVE PILLOWS

It's easy to hit the holiday refresh button when you have a few simple tricks up your sleeve for customizing plain pillow cases. Since we're spending this Christmas in a new space, I wanted to add some cozy touches to the living room without spending a lot of money. I took three plain pillow cases and a handful of supplies I already had on hand and came up with a set of pillows that feel cheerful and festive.

These same steps can be changed out with different colors for fun new pillows in any season, but they're an inexpensive way to make a big impact during the holidays when you want a little more sparkle. Below are three easy tutorials you can tackle in an afternoon.

Supplies:-alpha stickers (similar to these)-metallic fabric paint
-washi tape
-paint brush
-chipboard or cardboard

To make the painted negative space pillow, think of a fun phrase and spell it out using your alpha stickers. Start from the center of your words and work your way out for even spacing. Place some cardboard inside your pillow to protect it from leaky paint. I used tape to mark off a clean edge around the pillow case and then painted right over it to the edges of the pillow instead. Paint over the tops of your stickers and give the pillow top two coats of paint. Remove stickers and let it dry. 

Supplies:-pillow case
-gold sequins
-tacky glue
-chalk
-ruler
-needle and thread

To make the swiss cross sequin pillow, outline the shape of a swiss cross with your ruler and chalk in the center of your pillow. Add glue to the left section. Then start laying down your sequin trim starting in the top left corner, slightly overlapping your chalk line so it doesn't show. Keep running your trim up and down in lines, making sure your edges line up at the top and bottom. Once you get to the middle section, add more glue, and continue in your rows until you finish the final section. Tuck the last sequin cut underneath the one before it to hide the tail. Loosely stitch it down after it has dried for a little more stability.

Supplies:-pillow case
-thick yarn
-metallic fabric paint
-foam paint brush
-needle and thread

To make the pom-pom pillow, wind your yarn between your hands so that it stretches about 12" wide and about 75 times. Then tie a double-knot around the center with another piece of yarn and again about 3" from each end so that you have tied it in three places. Trim off the end loops and halfway between the knots. Fluff your pom-poms and trim them up so there aren't any stray pieces sticking out. Paint any geometric shape on the front with your gold paint and foam brush. Once it's dry, insert your pillow and stitch your poms on each corner. 

I love how decorative pillows help a space feel a little more pulled together and finished!

If we're honest, the swiss cross pillow will have a forever home on my bed. I just can't quit gold sequins!

TRY THIS: NO-SEW SWEATER WRAP

Guys, I made a sweater from a favorite blanket. Well, it's not really a sweater, per se. It's not a poncho or capelet either. Maybe tunic? I'm not sure what to call it, but it feels similar to wearing a poncho (if you've ever owned one of those or a similar garment), and it's SUPER cozy. I'd like to think this is a more fashionable version of a Snuggie. 

So, if anyone has ever wished they could find a way to wear a Snuggie in public, man, we are kindred spirits. And also, this post is for you. 

This blanket was a present from my dear friend Holly. You know Holly, she's been teaching us to crochet lately. She's the sweetest. And last year she gifted me this beautiful blanket, and it's been used as a throw blanket at our home since. Until one day I found the dogs had dragged it out the dog door while we were at work. It got quite dirty, and I was afraid it was ruined. I had it dry cleaned, and they were able to get most of the stains out. I just love the colors of this blanket, so I decided to turn it into something wearable instead. 

Now, I actually have been working on my sewing skills. We are currently developing a sewing-based e-course (written by Rachel and Katie), and I've been learning a lot as I help them edit, save materials, move things over to our shop site, etc. But since this fabric is a synthetic fleece and doesn't fray, I knew I could easily turn it into something wearable without any sewing skills at all. So, I went for it. Here's what I did. 

I have this vintage body form. But, if I didn't, I could have just as easily used myself and a full length mirror. This project was all about draping. Whatever you use, it needs to be something along these lines.

First, I figured out where I wanted the front opening and head area to be. In case you're curious, my blanket was originally about 65" in length.

I measured to center my cut and created a space for my neck. I cut 14 1/2" in (found from draping), and I decided how big to cut the neck hole by measuring my neck and adding an inch. 

After every cut, I draped the blanket back onto the form (or sometimes myself) to make sure I was on the right track and things were laying properly.

After draping again, I found that the arms were too long. I had to essentially "roll" the sleeves, which doesn't really work with this kind of garment. So I cut off both edges. This meant I lost the navy blue stripe, but I still had three of the four original colors, so I was OK with that.

The last thing I did was cut two small holes for a belt to loop through. I had grabbed this red belt from my donation pile, and I planned to swap it out with a better one later. But it ended up working so well with the colors that I just kept it—repurpose win!

I like to wear this with the belt looped around the front of the tunic but not the back. The belt goes on the inside around the back. You could easily wear it either way. I just like the flowy look of the back, so this is what I prefer.

As you can see, you just wrap it around, belt it, and you're good to go. One day I wore it with a long sleeve cotton shirt underneath, and another day I wore it with a sleeveless, sheer collared shirt. I preferred the second as the fleece won't move as much against the long sleeve cotton, making it a little more tricky to move in throughout the day. Also, this gets seriously warm, so the sleeveless shirt felt better underneath in addition to allowing for more movement with the fabric. 

And there you have it. About thirty minutes of "work" and no sewing skills, and I love it! Thanks for letting my share my "new" blanket sweater with you

BALSA WOOD DIAMOND ORNAMENT

Hey, it's Laura again! I don't know about you, but I love seeing all the cool 3D things people create with paper. There are tons of clever little boxes and animals you can make, but I got extra excited when I discovered all the gemstone templates that exist online. Make my own diamonds?! Yes please. I thought the diamond shape would make a fantastic ornament for my Christmas tree, but I didn't think a decoration made out of only paper would store very well from year to year. That's where the balsa wood comes in! The wood makes the design much sturdier and doesn't change the overall geometric feel of the diamond.Supplies: Balsa wood (I used 1/32 inch thick), diamond template (I used this one), printer paper, cardstock paper, X-Acto knife, gold craft paint, ornament hooks, super glue, screw eye hooks (13/16 inch).1. Print out your diamond template. Place template on top of your balsa wood and use your X-Acto knife to trace over the outline of the template to cut out your panels. 2. Print another template on a heavier cardstock and use scissors to cut out your template. Pre-fold your template and flatten back (this makes it easier to fold once your wood is glued on). Attach each panel to its designated spot with super glue. 3. Assemble the diamond by using the super glue to attach the tabs in the appropriate spots. Before you glue the top piece down, make sure to screw your eye hook into the middle of the top panel (this is what you'll attach your ornament hook to). 4. Paint the diamond with the gold paint. Once it's dry, you're ready to hang your diamond!
In addition to making a few solid gold diamonds, I added a coat of glitter to some to add a little variety (just paint a coat of Mod Podge and sprinkle loose glitter on top). I love how these ornaments turned out. They add a punch of gold-plated fun to our tree, and I can tell everyone that I got loads of diamonds for Christmas. Score! 

MAKE YOUR OWN SKULL STRING ART

One of my goals this year was to create a couple of decorations for each season that I would be excited to store and pull out for years to come. This skull string at is a new favorite! It's large (2x3 feet!), so it makes a great statement piece above our piano in our dining room. It catches my eye and makes me smile each time I walk into the room. Do you wanna know a secret? It's really simple to make! Here's how:Supplies: 2’x3’ piece of wood (about ½ inch thick), white nails, black paint, and white string.

1. Paint your piece of wood black and let it dry completely. 2. Print out a skull photo (we used one we found with Google) as a blueprint copy with the widest part of the skull measuring about 18 inches. The shape of our skull print is all that matters- so no worries if the print comes out a little pixelated. 

Note: If you don't have time to get a blueprint copy, try this (easier) method instead!3. Tape your skull on top of your black wood and use a highlighter to plan out where you want your nails to go (you will want to make an outline around the skull, eyes, nose, and mouth). Space your nails about one inch apart and make sure to put one at any point your outline switches direction.4. Use a hammer to nail in your nail outline, but be careful not to go through to the other side of the wood. Once your nail outline is in place, you can rip off the paper skull guide underneath the nails.5. Tie your string to one of the nails that outlines the head and follow the nails to make a string outline around the head (go around the head twice). Do the same for your eyes, nose, and mouth outlines.  6. Starting at the bottom of your skull, begin to wrap the string in a zig-zag pattern between the nails and continue to zig-zag your string until your area looks full. Make sure to switch the direction of string often and include strings going both horizontally and vertically. 7. Repeat this process for the middle third of the skull and then, finally, for the top third of the skull.8. Tie your string to whichever nail you end on, and you’re finished!

Tip: When the season's over, use craft paper to wrap this art up for storage and label the package, so it's easy to find next year. You don't want to damage those pretty strings.

There's nothing more satisfying than a DIY project that turns out exactly how you envision it! If you give this project a try I think you will be surprised how easily it comes together. Do you have any halloween themed crafts you've tried and loved lately? Tis the season!

MOON AND STARS BIRTHDAY PARTY

When I was pregnant, I loved envisioning future precious moments with my child— our first family hay ride, looking at holiday lights, and celebrating birthdays with family. But when Lucy was born, she didn't give one hoot about Christmas carols or pumpkin carving. What? Babies don't like carving jack-o'-lanterns? Come on!

Well, my dreams finally came true when we celebrated Lucy's second birthday. I thought she might explode from excitement! I could not have been happier! (Of course, I was also glad she didn't actually explode.) She kept pointing out all of the stars, running around with balloons, and squealing with excitement about every little detail I had put into the day. When it was time to blow out the candles, the pure joy on her face made my heart melt. This was it! The moment I had been waiting for since I started this whole motherhood thing.

We had a wonderful time celebrating Lucy's second birthday, and I really enjoyed putting together all of the special elements for her small family party. Scroll down to check out how I made everything, including the marquee moon sign above, the star garlands, and fancy little candle holders.

We settled on a moon theme for our toddler's birthday party because of her undying love for the moon. She enjoys pointing it out in her children's books and outside in the night sky. In fact, the moon was the first thing she ever pointed out and called by name (except for ball, Mom, and Dad). So it was an obvious choice, and something I knew would be fairly easy to execute in terms of birthday party decor.

I'm not a big believer in extravagant children's birthday parties, but I definitely wanted to make Lucy feel special by putting together some inexpensive things I knew she would love for her special day. It took a bit of work and some helping hands to get everything finished in time, but the little bit of work was worth it when I saw the joy on her happy little face!

THE FOOD

For the cake, I made a two-layer 8" carrot cake and frosted it with my favorite cream cheese frosting that I dyed turquoise and yellow to match the rest of the decorations. Other treats included brownies cut out into star shapes and sugar cookies cut out in the shape of crescent moons. To make the crescent moon cookie cutter, I just bent a round cutter into the shape I wanted since I couldn't find the right size crescent cutter in stores.

The recipes I used for the cake and cookies are my favorites after trying out many recipes in books and online. Check them out below:

-carrot cake from All Recipes
-cream cheese frosting from the old Better Homes and Gardens Cook Book (similar recipe here)
-sugar cookies from Cooking Classy (They're just like Lofthouse cookies— I promise!)

We also had a veggie tray and my mom made fruit kabobs with melon and grapes. The kabobs were originally supposed to include melon slices cut into star shapes with grapes in between, but we decided there was too much waste in between the shapes, so practicality won out in the end. If we had room in our fridge, we could've saved the scraps for smoothies or something. Maybe the next time I throw a star party. (I'm hoarding all of these decorations for someone's baby shower some day!)

For the main meal, we had pizza pies (okay, okay... so it was just Pizza Hut pizza), as a delicious nod to the Italian romantic classic "That's Amore".  "When the moon hits your eye like a big pizza pie...." You know the one!

I wanted to stay on theme with the colors of our beverages, so I bought some Jones Soda in Berry Lemonade Soda and Cream Soda flavors. They were a big hit!

When I was planning the party, I was trying to think of all the sky-theme treats we could have, and believe me— there are a lot! Blue cotton candy, for instance. But like I said, we weren't trying to do anything too lavish for a two-year-old, so we kept it simpler than my crazy imagination had planned.

THE TABLE RUNNER

For the table runner, I took a yard of blue polka-dotted fabric and cut it into strips, using the extra fabric to decorate the drinks bucket and utensil bucket. This little project was a little time-intensive because I ran all of the strips of fabric through a serger to piece them together. But if you wanted the same look with less work, you could just make the long strips of fabric (I connected 3 shorter strips to get the long pieces) and lay them on top of a fabric table cloth. The table runner helped tie together all of the decorative elements in the room, I think, so it was definitely worth the time— and I'm sure I'll use it again some day.

Just look at that face! Definitely made it all worth it! And let me reiterate how much I enjoy finally being able to plan a birthday party for a kiddo. This is the moment I've anticipated since reading my first American Girl magazine back in 1994. Check out the craft instructions below!

MAKING THE MARQUEE MOON SIGN

As far as signs go, I'd say this one was remarkably easy. I had originally intended to simply cut a piece of foam board into a circle and paint it to say happy birthday with a crescent moon balloon hanging off to the side a bit. Somewhere along the line, while buying foam board at the craft store, I decided to step it up a notch and make a marquee sign.

Supplies:-1 piece of large foam board (size depends on your desired outcome)
-permanent glue
-duct tape
-paint (I used this blue and this yellow paint.)
-LED string lights*

*I suggest using LED lights to avoid this project becoming a fire hazard.

Tools:-pen or pencil and medium-size Sharpie marker (for making holes for lights)
-paint brush
-X-acto blade
-ruler

Step One: Begin by cutting out the circle for the background of the sign. I drew the circle with a compass much like the one I used for this mirror DIY. Then I cut it out with an X-acto blade on top of a cutting mat. I used the circle I had cut as a template for the crescent shape.

Step Two: Paint the shapes with spray paint. I used this multi-surface paint they sell at craft stores.

Step Three: Make the holes for the lights. First, use a ruler to mark out the distance between each light. Use a sharp pencil or other object to poke holes through the marks you made. (I started out using a drill for this, but it was kind of shredding the foam board.) I ended up making the shape of the holes by pushing a medium-size Sharpie through them. It made the perfect snug fit for the lights.

Step Four: Push the lights through the holes and secure the wires with duct tape.

Step Five: Stack pieces of scrap foam board to give the lights some buffer space (see in above image). Connect them to each other with permanent glue, and then also to the back of the crescent piece. When the stacked foam board glue has dried, put glue on them to attach the crescent to the background piece. Place books on it to weight it down until dried.

Step Six: Paint your message onto the sign. I drew it with pencil first and went over it with white acrylic paint and a paint brush. It's not perfect, but I don't think Lucy minded!

MAKING THE STAR GARLANDS

I spent quite a bit of time in front of the television punching out stars from cardstock, but it turned out I made way more stars than I needed! Making the garland was as simple as running the cardstock stars through the sewing machine with space in between each one. They were hung from the ceiling by taping the first star with white duct tape. I also stitched some stars onto ribbons to weigh down the Mylar balloons.

This project was the most visually effective for sure! The room wouldn't have looked half as magical without them.

Tips:

To give space between the stars, lift the sewing machine foot and pull the star you just stitched away from the machine. Place another star under the foot, lower the foot, and pull the previously sewn star as you begin sewing the next one.

Sewing paper will dull your needle, so you may want to use a designated needle for paper stitching, and you should definitely swap out the needle with a fresh one before stitching fabric again. You can use a medium-weight needle for this star garland unless you're sewing through something thicker than cardstock, like chipboard.

MAKING THE GOLD LEAF HURRICANE CANDLE HOLDERS

I wanted something somewhat substantial to decorate the middle of the table, so I made three hurricane candle holders to place on top of golden stars I got from a party store.

Supplies:-glass or plastic hurricanes
-gold leaf kit (includes sizing, metal leaf sheets, and sealant)
-masking tape
-wax paper

Tools:-paint brush
-masking tape
-star punch

Step One: Place masking tape onto wax paper and punch out star shapes. Then peel the masking tape stars off of the wax paper and place onto the hurricanes in your desired pattern.

Step Two: Cover the hurricane and masking tape stars with a light coat of sizing. Make sure you've used high quality masking tape or the stars will pull away from the hurricane during this step.

Step Three: After the sizing has set up (about 30 minutes), place the gold leaf sheets onto the hurricanes. Once the whole area is covered, rub the leaf into place with a soft cloth, then peel away the masking tape stars.

These hurricane candle holders were such a nice touch to Lucy's party, but I know I'll use them again for other holidays and events. They were seen at a friend's wedding last weekend! I love a party craft that can be used time and time again